Washing Machine Clicking Noise – Appliance Tech Company Explains

Using washing machines can be helpful since they enable you to complete a large amount of laundry within a short while. One widespread problem that washing machine owners encounter is a clicking noise from their appliance.

Why Is My Washing Machine Making a Clicking Noise? Your washer is making a clicking sound because an object or material is in the drum of the washer. Also, when foreign material is trapped in the filter or the rubber seal, a clicking or clanking sound will occur.

Puls, an appliance repair company, states that if an item is stuck in the drum, filter, or rubber seal of your washing machine, and causing a clicking sound, you should call a technician as soon as possible to prevent further damage to your machine. We all need a portable washer; I suggest the Compact Washer that is available on Amazon. Click here to have yours delivered to your front door.

How To Remove Foreign Material from the Washer Drum That Is Causing a Clicking Noise?

To remove foreign material from the washer drum, first unplug the machine from the power source and disconnect the drain lines, then inspect the drum closely and take out the foreign object with a pair of pliers or a screwdriver.

When a foreign material gets lodged in the washer drum, a clicking or clanking noise emits from the machine every time the drum rotates during a cycle and hits the object. This foreign material may be a piece of cloth, brassiere wires, or a coin. Always clean your washer after removing a foreign object. I recommend Affresh Washer Cleaner that is available on Amazon. Click here to have yours delivered to your house or apartment.

Objects that can get lodged in a WasherDamage that can occur
coinscoins can enter drum and scratch inside of drum
wired portions of lingeriecan tear other clothing and hook to the drum
keysdamage the drum, scratch interior of washer
rubber-backed matsrubber fragments can stick to inside of washer
small clothing stuck in smaller holes, need to place in a mesh bag
running shoesrubber can mark the inside of the washer and cause dents in some cases, place them in a pillow to prevent damage to your washer
zipperszippers will scratch inside of washer and damage the drum
screws check all pockets after completing a renovation, screws can damage the drum
source 1, source 2

In such a case, properly finding these materials, removing them, and properly cleaning the washing machine is your best solution. To find these stuck foreign materials, unplug the machine from its power source and disconnect the drain lines first.

how to remove coins from a washer

Then, inspect the holes in the drum closely with a flashlight by spinning it slowly with your hand. If the foreign object is a brassiere wire, then it will stick out through one of the holes in the drum, you should pull it out carefully with a pair of pliers.

When you turn the drum, and you hear a rubbing noise, a piece of cloth might be stuck in between the front of the drum and the tub. To remove this, you can pass a straightened wire cloth hanger or a large screwdriver through the space between the front of the drum and the tub, the hanger hooks up the cloth and pulls it out.

The clicking noise can also be a result of debris stuck in the washer drain, remove the pipes, and take out any debris you find.

Why Do I Hear a Clicking Sound in My Washer Only at the Beginning of a Cycle?

When you hear a clicking sound in your washer only at the beginning of a cycle, this sound occurs because of the lid locking into place. The lid locking occurs several times and simultaneously produces a clicking sound.

Not all washing machine models need the lids to be locked at the beginning of a washing cycle. Some washers fill up with the lid open but will not wash until you close the lid. Other washers will not fill up nor will the clothes wash or spin with the lid open. Always close the lid before starting a washing cycle.

Washer lids operate differently based on the manufacturer’s design. Read your owner’s manual to know how your washer lid should work.

The clicking sound you hear might also be because an object like a coin, a key, or bra wire might be lodged up somewhere in the washer drum. But usually, this clicking occurs continuously and not only at the beginning of a cycle.

To be on the safe side, you can examine your washer drum when the machine is disconnected from the power source.

Why Does My Washing Machine Make a Clicking Sound Only During the Gentle Cycle?

Your machine making a clicking sound only during the gentle cycle might be because the ball bearing that allows the drum to rotate freely around its axis has deteriorated, and it requires a replacement.

Knitwear in a bag for delicate washing of fabrics. The concept of gentle washing of clothes and fabrics.

The gentle cycle is also known as the delicate wash cycle – you use this cycle when washing weaker or lighter fabrics like bedding items and some blankets. This cycle is almost equivalent to hand washing. The spin is slow, and the agitation is low. It is the most tender washing cycle.

To determine if the clicking sound occurs because the ball bearing has deteriorated, you must disconnect the plug of the machine from the socket first, then disconnect the drain lines second. Next, slowly spin the drum of the washer with your hand. If you hear a rolling noise, then you need to replace the ball bearing.

Replacing the ball bearing can be an arduous process to complete successfully as it mostly requires a total strip down of the appliance. You should employ the services of a qualified technician to handle the ball bearing replacement.

Leaving the bad bearings in place can cause damage to other parts of your appliance, thus causing more expenses.

How To Diagnose Top Loading Washing Clicking Noise?

To diagnose top loading washing clicking noise, first identify when the noise occurs and at what point of the cycle the clicking starts. If it is at the beginning of the washing cycle, the clicking noise could be the lid locking into place.

Top load washing machine at bathroom

During the washing cycle, the lock of the lid may engage and disengage severally as the basket spins up and coasts down to sense the load size, every time this happens you will hear a clicking noise.

washing video loud noise top loading

In models of washers without a transmission, you hear a clicking or clanking noise when the cycle is moving from into the spin cycle, this clicking or clanking noise indicates a mode shifter.

In models like this, as the machine transitions from agitation to spinning, the gear system in the agitator and the basket act together so they can spin.

There are other normal sounds made by the top loading machine that may cause unnecessary worries, including:

  • Drumming:

Drumming occurs when air is being pushed out of the basket towards the outer case; this causes the outer case to move in and out which produces sounds like a drum being beaten.

  • Waterfall:

This happens when the drum is being refilled with water, usually before the rinsing begins.

  • Gurgling or Slurping:

Gurgling or slurping sounds are heard when the drum is being drained of water before the rinse.

  • Humming, Grinding, Electric Pulsing, or Pausing:

These sounds are all heard during a full washing cycle. The humming and grinding happens as the clothes are agitated and washed.

Other sounds like rattling, banging, bumping, and thumping are not normal sounds. They often happen because of improper installation like the shipping rod being left in, causing an unbalance in the washer. Check your installation instructions and read how to take out the shipping material.

How To Check to See If the Wire Harness in the Washer Drum Is Causing a Clicking Noise?

To check if the wire harness in the washer drum is causing a clicking noise you must remove the cover, following the guidelines from the manual, then inspect the sides, top, and back of the drum for any object that may be out of place.

wired bra noise in washer

A wire harness is an important part of the electrical system in appliances such as washing machines. Also, it can cause a clicking sound in a washing machine. A recommended way to check the source of the clicking noise is to first listen closely for hints to the source of the noise.

Do this by moving around the machine to identify where the sound is loudest and notice when the clicking happens, whether it is at the beginning of the wash cycle, during the drain or if it happens during a particular wash like the delicate wash cycle.

When you have identified these, next you must unplug the machine from the wall socket and disconnect the water supply. Gently spin the drum and listen for the clicking noise.

Remove this object if you find any, also ensure you check and empty your pockets before putting your clothes in the machine to wash. Remove this object if you find any, also ensure to check and empty your pockets before putting your clothes in the machine to wash.

If a clicking noise is heard during the drain, then you should inspect the pipe, which drains out the water, and the washer drain for a foreign object that might be stuck in it. Do not forget to disconnect the appliance from its power source before you carry out any inspection.

If you hear the clicking noise only during the gentle wash cycle, you need to check if the ball bearing of the tub is damaged or not, also check if there are loose screws or bolts when you remove the top panel and tighten them if you find loose ones.

Why Does an Uneven Load In a Washer Cause a Clicking Noise When Rinsing?

An uneven load in a washer causes a clicking noise when rinsing because the imbalance makes the inner tub of the washer to spin in a manner that is not regular or consistent, frequently hitting the outer tub.

Washing machine drum with water and clothes, closeup view

When you overfill your washer with too many clothes or unevenly arrange laundry it causes a clicking noise, try to separate your clothes by their weights, wash heavy items together, and do not just dump all your dirty clothes into the machine together.

Ways to Balance a Washer
redistribute the load to make it more even all around, try to add less clothing if this does not work
level the washer by adjusting the feet of the washer
placing rubber vibration absorbers may work if you cannot balance the washer easily by adjusting the feet

Also, try to reduce the amount of laundry you put in the drum, so there will be more room for your clothes to move about during the washing cycle. The ideal laundry load size for washing machines is 80% and 60% for top-loading washers and front-loading washers, respectively.

loud banging noise in washer

If you frequently put an unbalanced load in your washing machine, this can cause harm to the bearings and your machine would need to be repaired or worse replaced when that happens.

Here are some general reasons why your machine might be making noises:

  • It is off balance, which is being on uneven ground. Check and change the position if this is the case. If you shake the machine, and it rocks, you need to adjust the feet from underneath the machine.
  • The basket or drum in the front-loading machine might be damaged, gently move the washer drum upwards and downwards. If it moves inordinately, one or arms in the drum are broken.
  • The drum screws have gotten loose. Take off the top panel, examine the drum screws and tighten the bolts there, after you do this put the panel back on, turn on the machine, and put it on a spin cycle to give it a test.
  • The ball bearing of the tub could be worn out and in need of replacement. Gently spin the washer drum and listen carefully for a rolling or rattling noise to determine if there is something wrong with the ball bearing.
  • There might be an issue with the shock absorbers on front-loading washing machines. Open the back panel and check if the shocks are worn out or not connected. If this is the case, they will need to be replaced or repaired.
  • The belt system of your washer, which often includes pulleys to run the motor, might be compromised. To check this, remove the washer cabinet to examine these components. If you notice any breaks or cracks in them, they will need to be repaired by a professional.
  • One or more of the four suspension rods attached to top loading washer frames with springs to keep the washing machine balanced may be damaged. Check your owner’s manual to see where these rods are and how to access them. You may need to employ the service of a professional if the rods are damaged.

Many of these issues may need a professional to fix them, do not always insist on fixing them yourself, that way you do not expose your washer to further damage. Also, ensure to disconnect your machine plug from the wall socket and the drain lines too.

Related Posts

why does my washer smell like sewage

frigidaire washer stuck on spin cycle

Aron Blake

I am the lead copywriter on Homezesty and the Webmaster. I have a lot of experience in home renovations and the creation of style. I enjoy writing and sharing my tips on how to create the best living environment. My Linkedin Profile, My Twitter Account

Recent Posts