Top Loader Washing Machine Making Loud Banging Noise On Spin Cycle: Fast Fixes

It has probably happened before, and if you don’t fix it, it will happen again. That annoying, alarmingly loud banging noise that a top loader washing machine makes on the spin cycle is not a normal sound. Unfortunately, that banging is a sign that something is wrong, but the question is always what, and more importantly, can you fix it? The good news is that you can usually fix the problem fairly quickly. While one particular fix takes a little longer, there are several normal reasons why your machine might be having trouble, and most or all of them can be repaired at home with relatively little skill and very few tools. Moreover, a top-load washer isn’t as complex as you might expect, especially older models. I’ll walk you through the likely causes and their fixes so you can get back to doing laundry in no time. 

Why does my top loader washing machine make a loud banging noise on the spin cycle? Your top loader washing machine will bang loudly during the spin cycle if there is an imbalance in a load of laundry.  This puts a strain on the shocks within the washer and sooner or later, the drum will touch the sides of the washer when on full spin causing a loud thumping noise.  Also, if you overload the washer, the belt will be stretched too much causing a loud noise.

Fixing Simple Mistakes That Make Top Loading Washers Bang While Spinning

All top loader washing machines get old and eventually have parts that wear out or need replacing. However, some fixes are even simpler than you might think. By turning the machine off and checking a couple of crucial areas, you can occasionally fix the problem without needing to make any repairs. 

Area One- Inside

You need to turn off the machine and open it up to check inside. Two different problems happen inside your laundry that can cause banging. The first is downright silly, and the second is simple enough a relatively young child could spot it. 

First and foremost, look for loose objects or full pockets. Anything that can clang or bang against the sides of your machine and that shouldn’t be in the wash could be to blame causing a weight imbalance due to these objects. From cell phones to toddler toys, remove foreign objects promptly. 

The second in-the-wash problem that can cause seriously loud and regular banging is an unbalanced load. In newer machines or recently refurbished models, the springs or dampening straps may be so taut that it doesn’t give enough flex for the clothing bin to bang around. However, after a few years, it’s more likely to thump and generally make a ruckus if you didn’t distribute the load evenly. 

Area Two- The Lid

Before you assume some more severe issue is to blame, make sure your washing machine’s lid is secured properly. A loose lid can bang if it doesn’t latch. Furthermore, an older latch can rattle as the top-loading machine spins, making plenty of noise. Once you’re sure you checked the lid out for latch issues, you will finally need your first tool. 

Grab a level and see if your machine is sitting on flat ground. You may notice it with the naked eye if the tilt is large enough. Otherwise, a subtle tilt can act the same as an unbalanced load causing the tub to bang against the case as it spins. 

Every home repair tool kit needs a high-quality Hychika Laser Level from Amazon. You can use this level on both vertical and horizontal planes. Moreover, it has both automatic and manual settings for the best possible reading. Learn more on Amazon by clicking here

Pro Tip: Wash the appropriate amount and weight loads for your machine. Do not overfill or underfill your washer. Simply reading the labels and instructions can save you many headaches, damage, and repairs down the road. 

The Bad News Noise

One part of a top-loading washing machine that can make noise during the spin cycle isn’t worth replacing. If the transmission goes bad in your washer, it’s often more economical to replace the entire machine. Luckily, it’s also not too hard to figure out when this is the likely culprit. 

If your washing machine whines as it works, that’s a sign that the transmission is going. However, that’s not the only sign. Banging and other noises during the spin cycle can help point out a worn or broken transmission as well.

Should you have both of the above symptoms and a burning smell, then turn the machine off. Either your top loader’s transmission is dying, or several other parts have broken at the same time. For example, a belt can malfunction and make a burning smell, but it doesn’t usually whine. 

Removing and replacing a washing machine’s transmission is not a simple DIY task and is best left to professionals. Regrettably, the cost of this service often matches or exceeds the price of a washing machine. Thus this is the part of a washing machine that is a significant concern if it causes the banging you hear during the spin cycle. 

Replacing Parts to Stop Banging in Top Load Washers

When your top load washing machine makes noise during the spin cycle, and you’ve checked all the basic fixes off above, nine other parts are likely to be at fault for the sound. Several of these options will usually make noise during other parts of the cycle as well. However, you should still check each part before moving on to the next, so you know for certain it is in good repair.

Moreover, if you are disassembling your washer, it’s wise to check all these areas anyhow. Luckily, almost everything on this list is simple to identify, remove, and replace

For example, you can quickly replace many belts with a high-quality WH08X10024 Washing Machine Drive Belt from Amazon. The see belts are compatible with Sears, Hotpoint, and numerous other brands. At forty-eight and a half inches long, the thick, unbroken rubber belt won’t bang against your machine, ensuring the tub’s smooth movement. Click here to have one delivered to your door

  1. Springs and Dampening Straps- These are used to secure the tub in place as it moves. If a strap or spring has come loose, it may be making noise as the top-loading washer spins. The vibration can cause a part to bang against the tub or outside case. 
  2. Drive Pulley- This circular pulley is either plastic or metal and has a belt to spin the washer. Inspect the part for damage, and once you have the old or new part positioned, your belt should move properly to spin the machine again. 
  3. Belt- If your belt is worn or broken, it also makes noise when the machine spins or tries to spin. Slip off the old belt and replace it with a new, high-quality part for a fast and simple solution. The rubber should be unbroken and smooth when it is working correctly. 
  4. Motor Coupling- This plastic part is made to break if you overload a washer. A simple swap is all it takes to change out this part. In the future, you should be more careful about the size of your wash loads. 
  5. The Bearing-  These disk-shaped parts sit below the tub and allow it to move without resistance. You will recognize the round shape and the ball bearings inside that give their name to the bearing. The tubs’ uneven movement causes banging. Meanwhile, the squeak or shriek of a worn, unlubricated, or damaged bearing would contribute to the cacophony. 
  6. Clutch- The spinning clutch helps regulate the speed increase in your washing machine. If this part causes the loud banging, remove it, and replace it with another suited to your top-loading washer. 
  7. Drain Pump- The drain pump is among the less-likely suspects, but it can produce a banging sound. Make sure you clean this part seasonally or more often if you use your machine often. 
  8. Washer Agitator Cogs (Dogs)- Agitator directions cogs, or dogs as they are sometimes known, will wear out over time. All you need to replace these are new dogs and a socket wrench, so adding them to your annual maintenance list is a wise precaution, especially if you wash a lot of laundry or overload your machine frequently. 

An excellent DEWALT (DWMT73804) Socket Set can help you with your dog swapping. The direct torque technology is easy to use. Moreover, you can add the extension piece when you need more clearance for your hands. Plus, the polished chrome vanadium finish and hand-stamped markings make these tools both durable and beautiful. See the outstanding Amazon reviews right here

Final Thoughts

Whatever the cause of the banging in your top-loading washing machine as it spins, all of the solutions are straightforward enough. Like bearing problems, some may require a little more understanding of how a washer works, but that doesn’t make it especially difficult to fix. With a little patience, you can run down every possible source of the noise in a fairly short period of time.

Before self-repairing, always check your warranty. Some simple solutions, like rebalancing a load or placing a shim under the front end to get a level washer, are always acceptable. Regrettably, there are fixes that can void the warranty, though, for machines past the warranty date, this won’t apply. A good washing machine can last you more than a decade if you treat it right. Whenever you hear a strange noise from your washer, check it out right away and make the necessary corrections before you finish washing clothing to help prolong your machine’s life. 

Related Posts

why does my washer smell like sewage

frigidaire washer stuck on spin cycle

why does your front loader washer smell bad

Aron Blake

I am the lead copywriter on Homezesty and the Webmaster. I have a lot of experience in home renovations and the creation of style. I enjoy writing and sharing my tips on how to create the best living environment. My Linkedin Profile, My Twitter Account

Recent Posts